Spiral Wound Gaskets

Spiral Wound Gaskets

Spiral wound gaskets have the ability to recover under the action of fluctuating loads caused by process fluid pressure and temperature changes, flange face temperature variations, flange rotation, bolt stress relaxation and creep.

The gasket-sealing element consists of a pre-formed metallic winding strip with layers of a softer, more compressible sealing material which, during compression, is densified and fl ows to fill imperfections in the flange surfaces when the gasket is seated. The metal strip holds the filler giving the gasket mechanical resistance and resilience.

Style GR - Utilises an external ring which accurately centres the gasket on flange face, provides additional radial strength to prevent gasket blow-out and acts as a compression stop. A general purpose gasket suitable for use with flat face and raised face flanges up to and inclusive of class 2500. Above class 600 an internal ring is recommended.

Style GRI - A Style GR gasket fitted with internal ring which gives an additional compression limiting stop and provides heat and corrosion barrier protecting gasket windings and preventing flange erosion. Suitable for use with flat face and raised face flanges and specified for high pressure/temperature service - class 900 and above or where corrosive or toxic media are present.

Style G - Basic construction type. Inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression and sealing characteristics. Suitable for tongue and groove or male and female or grooved to flat face flange assemblies.

Style GIG - Solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter of the gasket. Designed to prevent accumulation of solids, reduce turbulent flow of process fluids and minimise erosion at flange faces. Suitable for male and female pipe flanges.

Spiral Wound Gaskets (SWG’s) for covers of fittings are
made according to customer specifications:

• Thickness of the spiral winding: 2.5mm; 3.2mm; 4.5mm
• Stiffness: Standard or Low Stress

Spiral Wound Gaskets can be manufactured with a range of filler materials according to different service conditions: 

Identification Requirements

Flange & Gasket Configurations
Flange Face

Recommended Gasket Style - for general duties

Recommended Gasket Stylefor high pressure/temperature duty, also for gaskets with PTFE filler, corrosive or fluctuating pressure or temperature service conditions

Categories: Products, Spiral Wound Gaskets


Product Gallery



Production Methods

We have four divisions of Gee Graphite to cater for your specific requirements

Gee Graphite Website Gee Valve Seals Website Live Loading Website Waterjet Cutting

By Post

Gee Graphite Ltd.
Havelock Street
West Yorkshire
WF13 3LU


  • t. +44 (0) 1924 480011
  • f. +44 (0) 1924 480017
  • e.
  • w.